Supermicro Server Motherboard X9DR3-LN4F+ 2x E5-2630 8GB Warranty USA Ship Free

Description

SuperMicro X9DR3-LN4F+ Motherboard Ver 1.10
30 Day Warranty on Domestic USA purchases only.
This is a version 1.10 motherboard that will work with intel v1 Series Processors. It has been tested and updated with the latest BIOS and firmware. It will work right out of the box with the current CPU and Memory pre-installed on board.
You will need a version 1.20A if you want to use it with intel v2 CPU.
Included:
2x E5-2630 6-Cores 2Ghz CPU
8GB DDR3 RAM
1x I/O Shield
Key Features
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and
E5-2600 v2
family
†
2. Intel® C606 chipset; QPI up to 8.0GT/s
3. Up to 1.5TB ECC DDR3, up to 1866MHz;
24x DIMM slots
* Depends on memory configuration
4. Expansion slots: 4 x16 PCI-E 3.0,
1 x8 PCI-E 3.0, 1 x4 PCI-E 3.0 (in x8)
5. 4x Gigabit Ethernet LAN ports;
Intel® i350 Quad port GbE controller
6. 4x SATA2 and 2x SATA3 ports
7. 8x SAS ports from C606
8. Integrated IPMI 2.0 and KVM with
Dedicated LAN
9. 9x USB 2.0 ports
(4 rear, 4 via header + 1 Type A)
Product SKUs
- Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X9DR3-LN4F+ -O
X9DR3-LN4F+ (Standard Retail Pack)
MBD-X9DR3-LN4F+ -B
X9DR3-LN4F+ (Bulk Pack)
Physical Stats
Form Factor
Enhanced Extended ATX
Dimensions
13.68" x 13" (34.7cm x 33cm)
Processor/Cache
CPU
Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and
E5-2600 v2
family
†
(up to 135W TDP **)
Note
† BIOS version 3.0 or above is required
Note
** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache
Up to 30MB
System Bus
QPI up to 8 GT/s
System Memory
Memory Capacity
24x 240-pin DDR3 DIMM slots
Up to 1.5TB DDR3 ECC LRDIMM
Up to 768GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
Memory Voltage
1.5 V, 1.35 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel® C606 chipset
SATA
SATA3 (6Gb/s) and SATA2 (3Gb/s)
RAID 0, 1, 5, 10 support
SAS
SAS from C606
RAID 0, 1, 10 support
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® i350 Quad Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video
Matrox G200eW
Input / Output
SATA
2 SATA 3.0 ports (6Gb/s)
4 SATA 2.0 ports (3Gb/s)
SAS
8 SAS ports from C606
LAN
4 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
9 USB 2.0 ports total
(4 rear + 4 via header + 1 Type A)
Video
1 VGA port
Serial Port / Header
2 Fast UART 16550 ports: 1 rear and 1 header
DOM
1 DOM (Disk on Module) power connector
TPM
1 TPM Header
Chassis (Optimized for X9DR3-LN4F+ )
2U Chassis
CSE-825TQ-R740LPB
CSE-826E16-R920LP
3U Chassis
CSE-835TQ-R920B
CSE-836BA-R920B
Tower / 4U Rackmount
CSE-745TQ-R920B
CSE-846BE16-R920B
CSE-847E16-R1K28LPB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards,
Revision M
chassis is recommended. Please talk to your sales representative for details.
Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis
SuperServer(s) with X9DR3-LN4F+
Model(s)
SYS-6027R-3RF4+
SYS-7047R-3RF4+
Expansion Slots
PCI-Express
4 (x16) PCI-E 3.0 slots
1 (x8) PCI-E 3.0 slot
1 (x4) PCI-E 3.0 (in x8) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Management
Software
SuperDoctor® III
Watch Dog
NMI
Optional IPMI 1.5 / 2.0
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
FAN
8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
RoHS, Halogen Free
Operating Environment
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)
to see this stores favorite items in your eBay Feed
Visit store:
UNIXSurplusNet
See other items